OzGemini.com

same as whats on mine! what size did you go for?

I've had a few different engine combo's from various people. And by far I am most happy with darrens work. He uses the right components, know how to assemble, and has the advantage of knowing exactly what to do to the head to get it to breath. No matter what you want Darren will be able to provide i...

Gene! its from Gone in 60 Seconds.

'What do you like better, having sex or boosting cars?'

...

Woohoo!!! It was the module!!! Yay Yay Yay! Best news ever!!! So mad at the guys on Pickering Street!!! They tested the module and told me it was fine! But the guys at AFI (Australian Fuel Injection) tested it up and said it was defintely toasted! So new module and it fired straight away! Now gotta ...

the ignition module is a bosch unit

Hi Guys, So my piece of crap car has been sitting for like 3 months now and I've tried every thing I can think of. To be clear, it was running perfectly before it just stopped running while i was driving it. And its deffinetly a spark problem. I'm running a Microtech LT8, it is getting its pulse fro...

Yeah the TF / TG shine through.

on the pedal you can pull the pin and screw the part on the rod out, so that it pushes the rod in just a little. this might help? Have you had a gem before? the brakes aren't like brakes in anything else. usually somewhat soft...

Got the bastards apart! Funnily I tried every way suggested with no luck! Screw driver didn't budge it. disk supported on blocks didn't work. i ended up holding it vertically and smacking the 45/ edge of the back of the hub and just worked my way around like 150/ at a time. Came off nice :) Thanks f...

light won't shine through photo paper. its basically cardboard.

i had a mate with a old corolla, he just used regular paper. but it looked kinda dodgy. kinda very dodgy.

theres a thread about this somewhere else. i was looking at doing it ages ago. You can't use photo paper because the lights behind it won't light up the instruments at night. You could get it etched onto a plastic. i've seen places that have a dual or triple layer plastic that the top layer is clear...

Ahh ok. Will have to organise mr gravity to come around and unleash hell on the offending items

Thanks Lok.

Yeah i've got all the bolts undone, I just can't seperate the disk from the hub. I was wondering if I need to take of the rear seal, because I can't get that offf either. I've got a spare one that the replacement stud is coming out of so I might be a bit more spirited with that one and se how we go....

How the hell do I get these out?



I'm trying to replace a stud that has been threaded badly. I have the brake and hub off, but can't get them apart!!!


Help!!!

Yeah, a gem head doesn't have the chanell. but to put the manifold on a gem head, does the chanell in the manifold need to be blocked up or anything?