I had a look, and most Autometer gauges run opposite to what you want. I think you're going to need to find a replacement sender, unless you can may flip it around?
This thread might help: http://www.motorgeek.com/viewtopic.php?f=5&t=39864
Search found 1439 matches
- Fri Jun 20, 2014 10:08 am
- Forum: Noobs Playground
- Topic: autometer fuel gauge help
- Replies: 8
- Views: 7304
- Fri Jun 20, 2014 10:02 am
- Forum: Noobs Playground
- Topic: autometer fuel gauge help
- Replies: 8
- Views: 7304
Re: autometer fuel gauge help
As in Isuzu workshop manual.. -Connect ohmmeter to tank and move float from 'E' to 'F'.The unit is normal if the resistance varies from 103 - 117 ohms to 1 - 5 ohms when float is moved.When float is in 'F' position,resistance should be 6 ohms when in the 1/2" position,resistance should be 32.5...
- Sat May 17, 2014 3:55 pm
- Forum: Gemini Chat
- Topic: g200 turbo oil feed.??
- Replies: 2
- Views: 1736
Re: g200 turbo oil feed.??
You can put an adapter between the block and the oil pressure sender, however I imagine there is another grub screw you can pull out of the block close by it that will work for a feed. Personally, I used an oil filter sandwich plate like this: http://www.japcarparts.nl/images/productimages/smaller/S...
- Sat Apr 19, 2014 4:08 am
- Forum: Noobs Playground
- Topic: G200 specs would be great !!!
- Replies: 7
- Views: 4790
Re: G200 specs would be great !!!
The holes rob to much oil from the big end bearings. out of all the g series that have spun bearings and thrown rods g200 would make up 90% of them. and only a guess but the g200 would only make up less than 5 % of all g series engines. Would this be the same for a G161 running a G200 crank/G161 ro...
- Sat Apr 05, 2014 11:07 am
- Forum: Noobs Playground
- Topic: Finding new front suspension components.
- Replies: 3
- Views: 2761
Re: Finding new front suspension components.
http://my.execpc.com/~rodney1/suspension/index.htm
These are $20 usd each, and they are slotted to give you camber adjustment. Well worth it.
These are $20 usd each, and they are slotted to give you camber adjustment. Well worth it.
- Wed May 01, 2013 10:25 pm
- Forum: Gemini Chat
- Topic: 15x7" mags - What's the ideal offset??
- Replies: 34
- Views: 9022
- Wed May 01, 2013 10:24 pm
- Forum: Gemini Chat
- Topic: Spring rates?..
- Replies: 1
- Views: 1140
I've got 450lbs in the front and 250lb in the rear. It's not too bad. I've been advised to go higher by an older friend who races Chevettes though. He has 900lbs or 1000lbs in the front of his race car and it rides much nicer than mine - it really comes down to the match between spring rate and shoc...
- Tue Apr 16, 2013 8:25 am
- Forum: Gemini Chat
- Topic: guard mod on euro gemy. help!!
- Replies: 6
- Views: 3419
- Thu Apr 04, 2013 1:18 pm
- Forum: Noobs Playground
- Topic: another wheel offset question
- Replies: 4
- Views: 2277
Re: another wheel offset question
Guys im looking at getting some 16x7 wheels with et33 offset, im running hoppers stoppers front brakes on my TD coupe with 17x7 et42 at the moment and they fit very nice. will these 16x7 fit. As I said in the last thread, I'm running ET25 with Hoppers and it's fine. Check my project thread for a pi...
- Thu Mar 28, 2013 5:17 am
- Forum: Gemini Chat
- Topic: 15x7 +20
- Replies: 13
- Views: 4133
They are +26, but I have Hoppers brakes which push the track out 10mm. It's effectively the same as running +16 on normal Gemini hubs/brakes. Full lock can be an issue when you are going over some uneven ground, but only on the outer guard which isn't really an issue as you're never going that fast ...
- Wed Mar 27, 2013 7:18 pm
- Forum: Gemini Chat
- Topic: 15x7 +20
- Replies: 13
- Views: 4133
- Wed Mar 27, 2013 11:33 am
- Forum: Gemini Chat
- Topic: 15x7 +20
- Replies: 13
- Views: 4133
- Tue Mar 12, 2013 9:37 pm
- Forum: Gemini Chat
- Topic: Surge Tank Setup
- Replies: 26
- Views: 9300
- Tue Mar 12, 2013 7:49 am
- Forum: Gemini Chat
- Topic: Surge Tank Setup
- Replies: 26
- Views: 9300
- Mon Mar 11, 2013 1:00 pm
- Forum: Gemini Chat
- Topic: Surge Tank Setup
- Replies: 26
- Views: 9300